FusFun™ ASA 3D Printing Material
Product Description
FusFun™️ ASA has excellent all-round properties, featuring minimal odor and UV resistance. It is an alternative to ABS filaments due to its similar physical and mechanical properties with ABS.
FusFree™ S-Multi Quick-Remove Support Material is a good support material for FusFun™ ASA, and it solves the question of poor support surface quality when FusFun™ ASA works as a self-support material.
Material Properties
Recommended printing conditions
Nozzle Temperature | 240-260°C |
Recommended Nozzle Diameter | ≥0.2 mm |
Recommended build surface treatment | Glass、PEI Film or PC Film |
Build plate temperature | 100-110°C |
Chamber Temp | Sealing or 60-80°C |
Cooling fan speed | 0-30% |
Print speed | 30-120 mm/s |
Retraction distance | 1-5 mm |
Retraction speed | 1800-3600 mm/min |
Recommended Support Material | FusFree™ S-Multi Quick-Remove Support |
Drying setting | 70℃ for 5-6h |
Annealing | N/A |
Printing Tips：
1.Compared with PLA and PETG filaments, ASA needs a higher environment temperature to release the residual stress during printing. Please keep the chamber closed to avoid warping and layer separation issues
during the process. If your printer has a heated enclosure already, please keep the chamber temperature between 60-80°C.
2.If you find the printing quality decreases after ASA has been exposed in the air for a long time, please dry the filament at 70-80°C for 4-6h.
Recommended printing conditions
