Odorless ABS 3D Printing Material
Product Description
FusFun™ ABS is an ABS-based filament specially developed for 3D printing. Compared with other
ABS filaments, it has a much lower odor and excellent mechanical properties.
Material Properties
Recommended printing conditions
Nozzle Temperature | 240-260°C |
Recommended Nozzle Diameter | ≥0.2 mm |
Recommended build surface treatment | Glass、PEI Film or PC Film |
Build plate temperature | 100-110°C |
Chamber Temp | Sealing or 60-80°C |
Cooling fan speed | Off-30 % |
Print speed | 30-120 mm/s |
Retraction distance | 1-5 mm |
Retraction speed | 1800-3600 mm/min |
Recommended Support Material | FusFree™ S-Multi Quick-Remove Support |
Drying setting | 70℃ for 5-6h |
Annealing | N/A |
Printing Tips：
1.Compared with PLA, PETG and other materials, ABS materials need a higher chamber temperature to help release the residual stress during the printing process. Please keep the printer chamber closed during the printing process. It can effectively avoid printed parts from warping and cracking. If the device has a heated chamber, it is recommended to set the temperature of heated chamber between 60-80°C.
2.If the ABS filament has been unpacked for a long time and the printing quality starts to degrade during the printing process, please dry the filament at 70-80°C for 4-6 hours before printing. Although FusFun™️ ABS has much less odor compared with similar products, it is still recommended to place the printer in a well-ventilated area during printing.
Recommended printing conditions
